This is a most excellent place for technology news and articles.
Person with vested interest in X says X will continue to proliferate. More at 11
Also, for some extra context:
Stupid elon
Haven't hard drives been cheaper per storage amount than SSDs forever? The problem was always that they were slow. I think tape may still be cheaper per storage amount than hard drives, but the speed is abysmal.
Edit: yeah looks like tape is 3x to 4x cheaper than hard drives https://corodata.com/tape-backups-still-used-today
Tape will be around until something better for archival purposes comes around
It lasts significantly longer sitting on the shelf than HDD or SSD by far
I doubt it’s being used for anything other than backups and archiving though
It's also used for sending huge amounts of data long distances. "Never underestimate the bandwidth of a station wagon full of tapes hurtling down the highway." That's usually attributed to Andrew S. Tanenbaum, but wikipedia follows that with "other alleged speakers include..." so take that with a grain of salt. They do note that the first problem in his book on computer networks asks students to calculate the throughput of a Saint Bernard carrying floppy disks.
Do we assume the Saint Bernard is spherical and ignores air resistance?
No, it's for real. The bandwidth of sending a truckload of disks to a destination can get to literally Tbps speeds. Latency is a different problem
Oh, I'm aware. Just making a tongue in cheek physics joke since they said he put that problem in a textbook.
Amazon is using trucks to ship hard drives for the largest data transfers. It's more efficient than doing it over internet. They also offer a service where they will put the data you want in a drive, mail it to you, and after you're done, you send the drive back.
It's criminal that some computers are still sold with mechanical hard drives, but I will still be using them in NAS for years to come. The right technology for the right job.
I only use them in my NAS because I keep ending up with spare ones.
Yes. SSDs are still excellent for small form factor and speed, but for long term reliable storage in massive volumes, old fasion hard drives are only second to tape storage.
Source: I am in charge of four 1.2PB storage clusters, each consisting of 144 10TB Toshiba drives. The systems write their output to 10TB tapes for data delivery.
Slow is relative.
Are you trying to compile 1GB worth of code or load into memory 4GB of game at startup: absolutelly, they're slow.
Are you serving a compressed 1080p video file from your NAS to your media player over 100Mb/s ethernet: they're more than fast enough. (Or to put things another way, trying to fit your home collection of media files on SSDs in yout NAS is probably not so smart as you can get almost 10x the storage for the same price and the bottleneck in that system isn't the HDD)
You're not going to put a massive production database of a performance criticial system on an HDD but storing "just in case" in one your historic of RAW images files after you've processed them is probably the smart thing to do.
Tapes themselves are cheaper but there's also the upfront cost of the tape drive (we're talking thousands).
And that there is the real crime. It's a real shame no one's making a tape drive at the consumer market price point. Tapes are a hell of a lot more convenient for backups and archival than the giant weird pile of storage formats we've seen over years.
The average consumer can make do with Blu Ray.
For me, reliability is now the bottleneck.
So many HDs are crapping out after about 5 years. Not saying SSDs are better, but I haven't used any for storage. But it's starting to feel like a subscription plan as I'm rotating hard drives in my server nearly every year now since 2018.
Wendel from level 1 techs really likes the multi actuator spinning rust drives. You still wouldn't use them for a boot drive, but they're fast enough to saturate a sata connection, while still being much more dense than ssds. They can achieve 500MB/s sequential speeds, so they're plenty fast for large file access. Most consumers should be using SSD's but if you're dealing with more than a couple terabytes, the best solution isn't as straightforward.
I mean, with stuff like ZFS, it's a little hard to justify the outlay for all solid-state disk storage when I can build out a large storage array using HDD's and use one mid-size SSD for ZIL and then L2ARC to provide read/write speedups. Who actually cares what the underlying storage mechanism is as long as the dataset is backed up and the performance is good?
Power consumption, noise, durability...
There is a lot of power to waste for the savings you made, when not buying expensive SSDs (20€ a year is not much). Where we use HDDs, we don't care about noise. Durability? We use huge RAID systems with lots of redundancy.
I personally like to swap new drives after 5 years to avoid failures. So when you find a 16 TB SSD for 350€, you send me a message.
This is my thing. I have about 122TB of spinning metal (with the same as an offsite backup) with SSDs as ZIL and L2ARC. And it's awesome. HDDs I think will genuinely be important for for the foreseeable future.
As a newb I hope one day in my journey, I can look back at this and say "I finally understand this." Til then thank you, magic man
We've done this exercise recently for multi-petabyte enterprise storage systems.
Not going to name brands, but in both cases this is usable (after RAID and hot spares) capacity, in a high-availability (multi-controller / cluster) system, including vendor support and power/cooling costs, but (because we run our own datacenter) not counting a $/RU cost as a company in a colo would be paying:
Note that the total power consumption for ~3.5PB of HDD vs ~5PB of flash is within spitting distance, but the flash system occupies a third of the total rack space doing it.
As this is comparing to QLC flash, the overall system performance (measured in Gbps/TB) is also quite similar, although - despite the QLC - the flash does still have a latency advantage (moreso on reads than writes).
So yeah, no. At <1.5× the per-TB cost for a usable system - the cost of one HDD vs one SSD is quite immaterial here - and at >4× the TB-per-RU density, you'd have to have a really good reason to keep buying HDDs. If lowest-possible-price is that reason, then sure.
Reliability is probably higher too, with >300 HDDs to build that system you're going to expect a few failures.
My 8TB Seagate failed a week ago and I was looking into new drives. The cheapest HDD was around 25 EUR per TB (for the 18TB ones) and the cheapest SSD were under 50 EUR per TB. No idea where this "7 times cheaper" comes, maybe from 2015.
I ended up buying a 4TB Crucial MX500 with 4TB for 208 EUR (barely enough for my data, but with some cleanup it will hold a year for sure).
Not only it's faster, it's smaller (fits in the NUC), it's quieter and it consumes much less electricity. I don't think I will ever buy an HDD ever again. Maybe for surveillance recording?
No idea where this "7 times cheaper" comes
Probably from back when Toshiba was relevant
Hamr drives and for data center use. Consumer ssds are made very poorly and even premium drives like a Samsung pro won't hold up in a data center environment. Hard drives on the other hand are basically only data center versions now.
They ain't called Seabricks for nothing. SSD will let you sleep at night.
I bought 18 TB seagate exos x18 drives for about $400 AUD each this year. What price are 18TB SSDs at?
Around AUD $4500
Mr Toshiba needs to fix his numbers!
I admin a datacenter and hard drives are never going anywhere. Same with tapes.
I work tech support for a NAS company and the ratio of HDDs to SSDs is roughly 85-15. Sometimes people use SSDs for stuff that requires low latency, but most commonly they're used as a cache for HDDs in my experience.
Not much point in using SSDs in a NAS if it's there just for holding your files
Lower power usage and smaller and maaaaaaaaybe better reliability. I’d probably do it if it was cost competitive… but it’s not yet.
Work for one of the largest and we literally finished phasing out tape this year lol.
In favor of what? Spinning rust, or some other media for archival backups?
Use HDDs for linear read/write (files) and SSDs for IOPS (databases)
And yet, at my local microcenter, I couldn't find a hard drive cheaper than an ssd of the same size.
I just bought a microcenter brand 1 TB SSD for less than $50. Can a HDD compete with that on price and read/write speed?
Also recently bought a gaming PC that does not have a HD, only a 1 TB SSD.
I think HDDs day as boot drives is over. Unless they get a lot faster which I think is unlikely.
HDDs are certainly useful for larger amounts of storage, though. Self hosting, data centers, etc.
ETA: I don't think any of the responses read my entire comment. See the LAST SENTENCE in particular, friends.
My NAS device has 80TB of usable space (6x16TB, raid5). Equivalent would've cost tens of thousands of dollars in drives alone.
Once 16TB SSDs are even available I will probably start migrating them in, but for now mechanical drives it is.
The last set of NAS drives I bought for my home server were ~$120 for 8TB, and while random access may not quite measure up, I'd put them up against your $50 Inland white-label drive for sustained R/W any day of the week, especially once the SSD's write cache is saturated. That's not even comparing like-for-like -- consumer hard drives using SMR are quite a bit cheaper than the NAS drives I bought, and enterprise-grade Flash storage costs 2-4 times as much as low-end consumer flash.
There's absolutely still a case to be made for mechanical drives in near-line storage, and that's not likely to change for quite a few years yet.
Nobody is buying $50 drives for a datacenter. What matters here is how this compares with 16TB+ sizes.
Toshiba's estimates feel reasonable. While the price difference is slowly narrowing compared to the widening performance and form factor gap, it'll certainly continue to be a slow death. The current price ratio would need to be inverted before it makes sense to drop hdds entirely. And even then tapes will still be around forever.
With investments in storage tech being so diverted away from HDD technologies I wonder how much further capacity will get. We're already at the point where disks have many platters and HAMR is finally going to be delivered after decades of "coming soon". It feels like, much akin to processor fab, we're approaching a wall.
