I'm not sure 160 is 2 minutes on my microwave.
this post was submitted on 26 Dec 2024
336 points (89.6% liked)
Showerthoughts
30131 readers
969 users here now
A "Showerthought" is a simple term used to describe the thoughts that pop into your head while you're doing everyday things like taking a shower, driving, or just daydreaming. A showerthought should offer a unique perspective on an ordinary part of life.
Rules
- All posts must be showerthoughts
- The entire showerthought must be in the title
- Avoid politics
- 3.1) NEW RULE as of 5 Nov 2024, trying it out
- 3.2) Political posts often end up being circle jerks (not offering unique perspective) or enflaming (too much work for mods).
- 3.3) Try c/politicaldiscussion, volunteer as a mod here, or start your own community.
- Posts must be original/unique
- Adhere to Lemmy's Code of Conduct
founded 2 years ago
MODERATORS
What happens when you type "1-6-0" on the time?
It probably becomes 1m 60s. I've had microwaves do it both ways, either having it only be in seconds or having seconds for two digits.
Edit: I'm dumb and very tired from Holidays, I'm leaving this up anyways though.
I've absolutely done it before because I'm weird. Entering 1:90 (on my Kenmore microwave) ticks down 1:89... 1:88... etc. until it hits 1:00 at which point it will continue as normal to 0:59.
1:60 behaves similarly.
I have a feeling the "add 30 seconds" button will correct it to proper time format, but I'll test it for science.
load more comments
(16 replies)
I dunno. I've never put in a time on my microwave - i just use the add button. Does it give you a minute and 60 seconds. Thats weird.
load more comments
(1 replies)
try it yourself. 160 is interpreted as 1 minute and 60 seconds. 200 is interpreted as 2 minutes and 0 seconds. Both are equivalent.
load more comments
(1 replies)
There are moments when I miss the stupid useless awards from Reddit.
Here you go .. it was given to me and now I'm giving it to you.
Lemmy gold 🥇
load more comments
(1 replies)
Clearly shows that hours and minutes are messy units. The French Revolution fixed a lot of stupid problems, but decimal time just didn’t stick for some reason.
Cannot say why decimal time didn't stick, but a similarly-proposed semi-decimal calendar with 12 months of 3 weeks each of 10 days was abandoned in France solely because Napoleon didn't like it.
It was also designed to frustrate Sunday church attendance because Sundays being every seven days would usually fall on a weekday on a workweek based on a ten-day week. While Revolutionary France experimented with state atheism and then deism, it eventually returned to Catholicism.
France spread its decimal measurements (the metre, gram, and litre) to the countries that Napoleon conquered or tried to conquer, but by that time, France was well beyond the "stamp out all semblance of religion" phase of its revolution, so a calendar designed with the intent to stifle religious attendance in mind was never going to stick very long once the French had left those territories. Besides, doing maths on length, volume, and mass is something that people do far more often than performing those calculations on dates. Sure, it would have made some things more convenient, but I'm guessing that for most people, the ten-day weeks just stuck out like a sore thumb.
In normal everyday life, you rarely need to involve time in your calculations. In science and engineering you do, and that’s when you run into problems.
When comparing two pumps, you run into issues like this. Which one is bigger: 29 m^3/h or 410 l/min. Doing calculations like that once or twice is recreational mathematics, but in a professional setting, these conversions are speed bumps standing in the way of getting stuff done.
load more comments
(3 replies)
Because 2:00 = 1:60
Or are we going to implement metric time?
The French tried to, briefly.
load more comments
(5 replies)
Your microwave does math funny
Sub-Thought: I wonder how many people punch in “1:00” instead of “60”?
Answer: not enough. Sub-sub-thought: of those people, how many open the door at 0:01 to avoid the bell?
If they do that, they'd better fucking clear the timer.
I shoot for opening between 0-1. So it clears the timer and doesn't beep. It was either get good at that, or check the manual for how to turn off the beep noise, and I sure as hell wasn't going to learn how to read.
load more comments
(1 replies)
I'll only buy a microwave if it stops beeping when I open the door. So if I open it right as the timer finishes then it only does like half of one beep.
Side note, the microwave also needs to go straight to time entry once I start pressing numbers. I've seen some stupid microwaves that you need to press a Time Cook button before the numbers or it will assume you are using its preset cook settings like "pizza" or "soup".
I've put a note on my microwave to mute all beeps. I've made it very clear to my wife, in the event of my untimely death, she is to show her next husband how to turn off the beeping after a power outage.
Wait you can turn off the beeping???
Not on all of them. Ask me how I know.
Since we're talking about the fine polish UX of microwaves, one feature I highly value that not all have is that it should end cooking at exactly the same angle I put it in. It should complete a whole number of rotations while running.
I know, for example, that my microwave completes one full rotation every 10 seconds. If I want to heat something for 45 seconds, it'll end up backwards. But that's on me for not using a multiple of 10 seconds.
For my microwave its 20 second intervals. But also, let's say I open the door mid-run, if the tray is rotating clockwise, when I restart it it will rotate counterclockwise. Every time you open it it reverses it's rotation.
I don't know if all microwaves do this, or just mine. I never really had cause to notice until I started making desserts and candies, where you often nuke for 10 seconds, stir, 10 seconds, stir to melt chocolate. Easiest to just set for 40 seconds and open/close than it is to reset each time. This is the only microwave I've done that with, though, so idk if it's common
load more comments
(1 replies)
+30s button, twice
load more comments
(1 replies)
Microwave UIs suck so bad. I've yet to find an improvement on the classic two analog knobs system, where one controls power and the other sets time.
Mine has a button to cycle between 5 power levels, a knob for time, and the start button is also a 30 second button. It's perfect
To save time on things that need to be microwaved for 1:30, I just hit 90 then start. Saves 1 button click.
The fastest way to get one minute on a microwave is to press the "add 30 seconds" button twice
load more comments
(2 replies)
load more comments
(1 replies)
"9999" equals 1 hour, 40 mins, and 39 seconds
I don't think you can even input :60 except as in 2 presses of [+30 seconds]
Huh, all of mine since I was a kid have taken numbers up to 99 in seconds. Gotta admit I've never tried x60-x99
I regularly use 55 or 66 instead of just hitting start 2x which does the 30 second thing because it's so ingrained.
And 44 seconds is known as an Obama, 33 a Truman, 22 a Cleveland, and 11 a Polk.
Pressing more than one number is sacrilege. and 45 is treasonous.
load more comments
(1 replies)
Had a friend who got a microwave that instead of a numpad it had a dial like a volume knob. It was so irritating for some reason to twist it and then have to turn it the opposite way to correct it. Like you wanted 45 seconds and you'd twist and it's be at 1:30, youd scroll back, 35... 50, fuck it good enough. I just would twist it to a number and then stop it 45 seconds in after I realized it was that way
Every microwave I've ever lived with has had a knob to input time. Maybe this is a regional thing?
My old one was completely analog and just had dials for time and power and a single button to open the door. Truly an efficient interface!
load more comments
(1 replies)
load more comments
(1 replies)
view more: next ›