A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.
Rules:
Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don't duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
No trolling.
Resources:
Any issues on the community? Report it using the report flag.
Questions? DM the mods!
Don't use btrfs if you need RAID 5 or 6.
The RAID56 feature provides striping and parity over several devices, same as the traditional RAID5/6. There are some implementation and design deficiencies that make it unreliable for some corner cases and the feature should not be used in production, only for evaluation or testing. The power failure safety for metadata with RAID56 is not 100%.
https://btrfs.readthedocs.io/en/latest/btrfs-man5.html#raid56-status-and-recommended-practices
Or run the raid 5 or 6 separately, with hardware raid or mdadm
Even for simple mirroring there's an argument to be made for running it separately from btrfs using mdadm. You do lose the benefit of btrfs being able to automatically pick the valid copy on localised corruption, but the admin tools are easier to use and more proven in a case of full disk failure, and if you run an encrypted block device you need to encrypt half as much stuff.
I have no problem running it with raid 5/6. The important thing is to have a UPS.
A bit of topic; am I the only one that pronounces it "butterface"?
Not anymore.
You son of a bitch, I'm in.
Ah feck. Not any more.
Isn't it meant to be like "better FS"? So you're not too far off.
i call it "butter FS"
No reason not to. Old reputations die hard, but it's been many many years since I've had an issue.
I like also that btrfs is a lot more flexible than ZFS which is pretty strict about the size and number of disks, whereas you can upgrade a btrfs array ad hoc.
I'll add to avoid RAID5/6 as that is still not considered safe, but you mentioned RAID1 which has no issues.
You shouldn't have abysmal performance with ZFS. Something must be up.
Did you set the correct block size for your disk? Especially modern SSDs like to pretend they have 512B sectors for some compatibility reason, while the hardware can only do 4k sectors. Make sure to set ashift=12.
Proxmox also uses a very small volblocksize by default. This mostly applies to RAIDz, but try using a higher value like 64k. (Default on Proxmox is 8k or 16k on newer versions)
https://discourse.practicalzfs.com/t/psa-raidz2-proxmox-efficiency-performance/1694
I'm thinking of bumping mine up to 128k since I do mostly photography and videography, but I've heard that 1M can increase write speeds but decrease read speeds?
I'll have a RAIDZ1 and a RAIDZ2 pool for hot storage and warm storage.
Btrfs came default with my new Synology, where I have it in Synology's raid config (similar to raid 1 I think) and I haven't had any problems.
I don't recommend the btrfs drivers for windows 10. I had a drive using this and it would often become unreachable under load, but this is more a Windows problem than a problem with btrfs
btrfs has been the default file system for Fedora Workstation since Fedora 33 so not much reason to not use it.
I've been using single-disk btrfs for my rootfs on every system for almost a decade. Great for snapshots while still being an in-tree driver. I also like being able to use subvolumes to treat / and /home (maybe others) similar to separate filesystems without actually being different partitions.
I had used it for my NAS array too, with btrfs raid1 (on top of luks), but migrated that over to ZFS a couple years ago because I wanted to get more usable storage space for the same money. btrfs raid5 is widely reported to be flawed and seemed to be in purgatory of never being fixed, so I moved to raidz1 instead.
One thing I miss is heterogenous arrays: with btrfs I can gradually upgrade my storage one disk at a time (without rewriting the filesystem) and it uses all of my space. For example, two 12TB drives, two 8TB drives, and one 4TB drive adds up to 44TB and raid1 cuts that in half to 22TB effective space. ZFS doesn't do that. Before I could migrate to ZFS I had to commit to buying a bunch of new drives (5x12TB not counting the backup array) so that every drive is the same size and I felt confident it would be enough space to last me a long time since growing it after the fact is a burden.
The question is how do you get a bad performance with ZFS?
I just tried to read a large file and it gave me uncached 280 MB/s from two mirrored HDDs.
The fourth run (obviously cached) gave me over 3.8 GB/s.
Didn't have any btrfs problems yet, infact cow saved me a few times on my desktop.
One time I had a power outage and one of the btrfs hds (not in a raid) couldn't be read anymore after reboot. Even with help from the (official) btrfs mailinglist It was impossible to repair the file system. After a lot of low level tinkering I was able to retrieve the files, but the file system itself was absolutely broken, no repair process was possible. I since switched to zfs, the emergency options are much more capable.
Was that less than 2 years ago? Were you using kernel 5.15 or newer?
Yes that was may/june 23 and I was on a 6.x kernel
One day I had a power outage and I wasn't able to mount the btrfs system disk anymore. I could mount it in another Linux but I wasn't able to boot from it anymore. I was very pissed, lost a whole day of work
ACID go brrr
What kind of disks, and how is your ZFS set up? Something seems amis here.
My setup is different to yours but not totally different. I run ESXi 8, and I started to use BTRFS on some of my VM's.
I had a power failure, that was longer than the UPS could handle. Most of the system shutdown safely, a few VM's did not. All of the EXT4 VM's were easily recovered (including another one that was XFS). TWO of the BTRFS systems crashed into a non recoverable state.
Nothing I could do to fix them, they were just toast. I had no choice but to recover using backups. This made me highly aware that BTRFS is still not a reliable FS.
I am migrating everything from BTRFS to something more stable and reliable like EXT4. It's simply not worth the headache.
If it didn't give you problems, go for it. I've run it for years and never had issues either.
Not proxmox-specific, but I've been using btrfs on my servers and laptops for the past 6 years with zero issues. The only times it's bugged out is due to bad hardware, and having the filesystem shouting at me to make me aware of that was fantastic.
The only place I don't use zfs is for my nas data drives (since I want raidz2, and btrfs raid5 is hella shady) but the nas rootfs is btrfs.
I run it now because I wanted to try it. I haven't had any issues. A friend recommended it as a stable option.
Using it here. Love the flexibility and features.
Meh. I run proxmox and other boot drives on ext4, data drives on xfs. I don't have any need for additional features in btrfs. Shrinking would be nice, so maybe someday I'll use ext4 for data too.
I started with zfs instead of RAID, but I found I spent way too much time trying to manage RAM and tuning it, whereas I could just configure RAID 10 once and be done with it. The performance differences are insignificant, since most of the work it does happens in the background.
You can benchmark them if you care about performance. You can find plenty of discussion by googling "ext vs xfs vs btrfs" or whichever ones you're considering. They haven't changed that much in the past few years.