3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
I'd suggest something with auto bed levelling at a minimum.
For a "just works" experience, you could consider the Bambulab A1 (not the Mini), although it is a proprietary design and only just exceeds the 500€/$ budget. At an additional cost, you can purchase the "AMS" which allows printing in 4 different colours.
Alternatively there's the Creality ender 3 v3 SE and KE editions which come in at about half your budget. These use a pretty common 3D printer design and it's fairly cheap to get spare parts or upgrades if desired. If going this route, I would personally lean towards the "KE" because it uses the open source Klipper firmware
There are a lot of Ender models available, please be cautious of the older ones and the cheap ones on Amazon as they are not the same thing - most of those have manual bed levelling and hit-or-miss quality control, which can make printing a little bit of a pain out-of-the-box for a beginner IMO...
As for me personally, I got my first 3D printer secondhand for the equivalent of €100 - it's a Delta style printer by FLSun and works great for me, however I did binge hours of 3D printing videos to familiarize myself with things just in-case the used printer arrived broken (thankfully it didn't, it printed fine OOTB!)
Thanks a ton for that response, that K3 seems actually pretty good, i have no idea what good features are / should be, but i trust it is modern and works. One question does it have auto calibration? I read some are manual… would it do multi color / could i upgrade towards it? I prefer being able to do that rather than order and wait again…. How does it compare to the sovol i heard a lot about?
And the software. Can i customise it / control it through my homelab?
It can be upgraded to do multi color, but it wouldn't be as seamless as the Bambu sadly.
From some quick research, while the Sovol SV06 and Ender v3 KE have auto calibration, the Sovol requires you to set the z-offset (just once, in one location) after auto bed levelling has completed. However the Ender v3 KE is fully automatic and does not require any kind of user input after the auto levelling has completed
The printers that run open source Klipper firmware, like the Sovol SV06 and Ender v3 KE, can be customized and controlled through your homelab network out-of-the-box. I'm not too familiar if the same is possible for the Bambu - I'm aware you can control it via their mobile app and slicer software, but you won't have the option of configuring more advanced settings that would be possible on a Klipper-based printer.
Thanks so much that was very informative! You all helped so much, i am grateful