3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
I own an Ender 3 V2 that I use around 10 times a year. It is one of the less sophisticated printers and still it does not require that much maintenance. You have to remove the dust, level the bed and sometimes clean or exchange the nozzle. More sophisticated printers can also do some stuff automatically (e.g. the bed leveling part).
However, the initial assembly and fine tuning took some time (approx. 1-2 hours), so I wouldn't recommend to dis- and reassemble it all the time. If you don't have that much space, maybe check for a small printer.
When I did my research 2 years ago the Prusa Mini was quite popular for small printer. But if you want to print big parts a lot, it might be a bit annoying as you always have to cut them into smaller chunks, print separate and finally glue them together.