No Stupid Questions

I use hyperx alloy core keyboard as I don't actually need programmable keys or an LCD. RGB and media keys are as far as I go.

Now they demand internet accounts to use the features of the keyboard and mouse that I purchased.

What are you talking about? Which keyboard, which mouse, which features, and which “internet accounts” are they requiring?

Also, Logitech still distributes the older software and it still works for the mice that it used to work with. My MX Vertical works with Logitech Options or the new Logi Options+ software, for example.

Did you try using that software with your new peripherals?

You can find the list by device at https://support.logi.com/hc/en-us/articles/360024361233--Software assuming this isn’t from their gaming line or something. In that case, go here instead: https://support.logi.com/hc/en-us/categories/360001764393-Gaming

Not only that, have to use wide-open-to-snooping Chrome to adjust the settings. You cannot adjust/use your mouse and keyboard if you just use Firefox.

I highly doubt that the mouse and keyboard cannot be used without Chrome.

Due to security concerns, Firefox did not implement the WebSerial API that’s most likely used to configure your mouse locally. Chrome did. It’s therefore completely reasonable that you would not be able to configure your mouse from Firefox.

That API is also supported by Edge and probably by most Chromium-based browsers, like Brave, the “Ungoogled Chromium,” etc.. If you have one installed and it doesn’t work, you can probably change your user agent to trick it into thinking you're running Chrome as a workaround. Most likely they only tested with Chrome and therefore only say they support Chrome, but don’t actually use any Chrome-exclusive functionality.

This only makes sense if they are planning (or are already) tracking my every move online to sell to advertisers or spooks.

That’s a bit of a leap.

If you use Firefox for browsing and only use this Chrome to run this tool to configure your keyboard and mouse, then even with cross-site cookies and so on unblocked, none of that will be visible from the other browser. So this makes you more isolated, not less. Having it in a browser app instead of a desktop app gives you more protection, not less.

If a company can provide a browser app to do everything a desktop app could, then they can speed up development without having to use something like Electron to distribute their app. And there’s even less friction than Electron because their don’t have to check for updates / require users to install the latest version manually, because they can just always serve the most recent one from the site. As a user, you can probably install the tool locally if you want (it’s likely a PWA) but you don’t have to, meaning you get less software installed on (or worse, constantly running in the background) on your machine.

Currently still using the G502 Hero, and all it's customization is on-board, edited using a portable .exe. I'm using some Rosewill mechanical keyboard which I believe has all its customization tied to inputs while holding the FN key.

Fuck, I hate always-online apps just to use the God damn peripherials I've paid for. I go far out of my way to avoid them.

I've done a lot of de-enshitification in my digital life over the past year, most recently by de-google my phone. I'm going to be honest: It's not easy, nor convenient, and a lot of the time not cheap. You really have to go out of your way to get what you want, sacrificing at least something a long the way (features, usability, etc). It takes quite a bit of desire and determination to move away from the modern garbage that these companies shove your way, and I'm honestly not sure if it's worth it for the average person because of the massive amount of effort that it takes.

All of the above is to say that if you really want to avoid enshitification you're gonna have to make changes, such as buying a different set of peripherals for your pc, and that it's not gonna be easy. The real question is: is all of that work worth it for you?

For me it 100% has been.

I know this might not be the most convenient solution, but learning to resolder mouse switches means you can just replace the faulty components (and maybe the sliders too) and just keep using the hardware that works for you. As long as you don't have a mouse with that awful rubber that de-vulcanizes after about 3 years, and don't mind the visual wear from your hand on the shell over time, you'll easily 10x the life of most products manufactured with planned obsolescence. Logitech almost always cheaps out on the switches for their gaming mice, unfortunately. After replacing the switches on my g pro wireless when they started double-clicking after 2 years (almost exactly), it's been smooth sailing ever since.

ifixit almost always has comprehensive teardown and rebuild instructions for popular peripherals. Bonus points is that whenever you take apart something to do a repair, you can clean out all the hard to reach places that collect random dust and debris. Can be kind of gross but is also pretty satisfying. Additional bonus points for being more sustainable with your consumer habits and minimizing e-waste in landfills!

If you've got a mechanical keyboard, you can do the same but it's generally a lot more tedious since most have the switches soldered on, and LEDs double the amount of joints you have to deal with. I recently did just the WASD and a few other high-traffic keys on my board after one one of them failed, and it was a several hour process

I can't remember how to do it offhand, but you should be able to save the settings to the hardware itself, then disable Logitech from opening. I changed settings not too long ago (2ish months) and this worked.

Could you remap the keys with AHK?

Some of the older apps will still work if you can track them down. Most of the features will work with no Logitech software at all (and something like AHK can help). The custom drivers themselves will probably work without the app or at least without logging in. My old M560 still uses SetPoint in Windows, and it seems less oppressive than the newer LogiOptions or whatever.

Finally, join us! There's a whole world of fully programmable open-source-firmware custom keyboards, and mice are coming along, too, especially trackballs.

dont buy crappy products. Some companies are simply too malicious and should be avoided. Convince others to do the same and tell others and it might even have some impact.

Bought a new keyboard a few weeks ago. Had function keys set to alternative hot keys. Only way Logitech offered to change that was to download their "options+" software. Don't remember for sure, but the final download size was MASSIVE. The software included AI tools, but had bare minimal settings options. It added support for additional gestures on the keyboard's track pad, but made the track pad jittery. Made the fn key switch, then uninstalled the software. The setting change didn't stick once the utility was gone.

Returned the keyboard. So excited for the day when my shoelaces and sunglasses require an Internet connection.

Build your own or buy from other mech keeb enthusiasts. Theres also probably some 60-80 dollar ones that use QMK, and using QMK is a pretty good sign the keyboard is open to you and you own it. Mice, idk I definitely have an enshittified mouse (proprietary app to setup). It's a gravistar. 130 for a magnesium mouse was too good to pass up.

I recently bought a nice MX series Logitech KB and a mouse that will pair with 3 devices, also Logitech. After seeing how terrible the software is, failing so hard as to temporarily disable the keyboard, repeatedly, I returned both.

My best advice is to either try to use them entirely without the software and all its customizations or sell your hardware, buying something better.

I'm sorry friend.

Haven't looked at their newer stuff so it's possible they are enshittifying too, but Das Keyboard has been a reliable low-frills brand for me for years (get one with blank keys if you really want to hone your touch typing skills!)

Don't have any suggestions on mice. I'm using a Razer

I assume you're talking about the Unifying feature.

I've got no direct experience, but there are a few people who say that despite Firefox not being listed as supported, it works fine.

https://forums.mozillazine.org/viewtopic.php?p=14961275

As for the spying, I can see how that could be a concern, but I don't think it's too likely.

For convenience, I'm guessing they're using a web interface to the settings in the same way that your router does. They've made a Chrome plugin, so that's probably the route they want you to take because they know it works.

Logitech is a global brand, an they'd get into a lot of trouble in a lot of countries if they were gathering keypress data etc.