3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
My default response is BTT E3 mini v3.0 but since you're looking to add more steppers something like a BTT Manta might be the way to go. Another option with Klipper is you can use multiple boards, I've only looked into this but you can use something like the E3 mini running Kilpper and then use the stock creality board to run up to 4 other steppers plus whatever. You're going to need a system running Linux for Klipper either a raspberry pi, a VM, or just a cheap PC you're not using.
I use a cheap pc I was not using, and let it do folding@home when I'm not printing... Actually... it does it while printing too. Anyways, Just get another board that handles klipper and just add it? Is there a specific "USB to Stepper" board, or do I just hotwire in another motherboard. I have the Ender 3 Pro with the "magical probably wont burn down your house" power supply, is that enough for another board, if I'm running another stepper?
Thanks!
Most control boards will let you know if they run Klipper in the listed specs and the stock ender 3 pro boards do run it, at least the 4.2.2 and newer boards do. You could probably even run an Arduino with an external stepper driver if you wanted to go real jank but I wouldn't recommend that as a second board.
The stock PSUs that come with the 3 pros are 350 watts and are mainly that big for heating the bed. Adding another stepper to the printer shouldn't tax that much more.
If you are looking at going the Klipper route there's a bunch of good install guides, I think Nero3d has a pretty good one and most the big printing YouTube seem to have done one at some point. Just beware they're usually guides for running the host on a raspberry pi so you'll have to figure out those parts using your own setup.