this post was submitted on 26 Aug 2023
516 points (94.9% liked)
Showerthoughts
30039 readers
1016 users here now
A "Showerthought" is a simple term used to describe the thoughts that pop into your head while you're doing everyday things like taking a shower, driving, or just daydreaming. A showerthought should offer a unique perspective on an ordinary part of life.
Rules
- All posts must be showerthoughts
- The entire showerthought must be in the title
- Avoid politics
- 3.1) NEW RULE as of 5 Nov 2024, trying it out
- 3.2) Political posts often end up being circle jerks (not offering unique perspective) or enflaming (too much work for mods).
- 3.3) Try c/politicaldiscussion, volunteer as a mod here, or start your own community.
- Posts must be original/unique
- Adhere to Lemmy's Code of Conduct
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
A megagram is 1000 kg, by definition. It's symbol is Mg.
In metric countries, we just use the word "ton" as shorthand/slang for it, since it is an easier term and was well known.
The only reason the US calls it a metric ton, is because they have archaic units (long and short tons).
Metric countries don't call it a metric ton.
No one in the US knows WTF a long and short ton are. A ton is 2k lbs. And most Americans probably don't even know the exact weight of a ton outside of "a shit load."
For the most part, we generally only use pounds, feet, miles. Everything else is a mystery. Even ounces, cups and gallons are some fucking magical mystery. Just follow the recipe.
I switched everything to metric years ago, and have never been happier. It made a huge difference in most of the things I do, having a system that makes internal sense. The only thing I still routinely use standard for is sewing, because it's damn near impossible to find any patterns or things like cutting mats in metric in the right sizes for quilting.
There recently was a discussion on lemmy where several US citizens (one of them allegedly an engineer…) tried to explain to me that metric might be „more precise“ (? 😂) but the imperial system more practical, because „everybody knows what a foot is“. When I asked them to add feet to miles I got shouted at (in CAPS) that noone (ever) does that. 🤷♀️
Lol, that sounds very much “as a black man”
I’ll tell you, most of us in the states would love a total switch to metric. We use it where is matters most, but we also have an aging population raised on lead has fumes that think anything they don’t know is “communism” or “wholeness” or whatever else the propaganda right spews. Those are the assholes that pretty much stop progress on anything.
I’m big into 3D printing, actually got into the same argument with another 3D printing guy…. And I’m like, literally EVERYTHING we do is in metric. The whole damn hobby is metric.
I hate humanity
You mean the „engineer“? Well, what can I say, he was insisting his professor at uni taught him „a true engineer can work with every system“.
I mean yes, but the difference is one engineer is just happily pushing around decimals, the other one goes pale when you ask what 1/5th of a gallon in cubic inches is…
Hehe, yea, I was poking fun at the “engineer”. There was a congressman a while ago that got caught posting right wing stuff on twitter from an alt account “as a black man” (dude was white of course”
Sometimes I like to think about the logistical challenges with a switch to metric. The one that always gives me pause is highway signs. Thinking about the monumental task of replacing every speed sign, distance sign, and mile marker across the country in any timely period makes my head hurt.
It could certainly be done, and is probably easier than I think with all the state DoTs working independently on it especially over time. We have a lot of road with a lot of signs.
That's a good point, but we don't have to even fully replace them. I admit I don't know the name of the technology but I see many street signs or construction signs that have basically a printed metal sticker slapped over the old information.
I honestly hate that argument. "it would cost so much to change all those signs" is just negative talk for "it would employee a shit ton of people, create a lot of jobs, and be a major infrastructure project that could help our economy.". Honestly, the economic benefit of major infrastructure works is rarely talked about as much as it should be. Mainly, I think, because the people it benefits are the ones actually doing the work. And that's scary to a certain segment of society that would like very much that not to be the case.
I don't think it's a valid argument against metric, just a thought experiment to consider about the time needed to implement. Converting would be a slow process, but I agree it could be an economic boost as swapping things is a largely a manual process
Meant to mention in my first comment, I haven't met many other people who like to randomly imagine the ways major structural changes would take place. Lol.
I like to pick a huge project. Like, say, single payer healthcare, or the nationalization of an industry, and then imagine the individual steps that would need to be taken to get there. Doesn't necessarily have to be a project I'd support, I just have fun imagining the ways it would need to happen.
I think the bigger one is the construction industry.
2"x4" studs. 4'x8' plywood. 16" O.C.
Changing to 44x95, 1219x2438, 406 O.C doesn't make a whole lot of sense. We could switch over to the metric equivalents (like 1250x1250 or 600 O.C.), but that would mean switching out machinery and would break a lot of standards.
I say that Metric is like color vision. You can see things in whole new and easier ways. People in USC can't understand what others see and insist things are just fine the way they are. Thus the "no one ever does that", "why would you need to know that", "who cares", etc.
I saw that too, and many of them claimed they learn both Metric and Imperial British systems and convert between them all the time. So this stood out now:
I mean, it's true. Ask an American to visualize an ounce of anything other than drugs, and they probably won't be able to. Ask how many ounces in a gallon, and they'll Google it. Even cups aren't well understood. We can eyeball a mile on the interstate, or tell you how tall someone is, or lift a box and guess it's weight to within 5 pounds. But honestly, that's about it. We just aren't really taught to visualize our weights and measures, it's why newscasters keep saying shit like "8 Olympic swimming pools!" Or "the size of three football fields" because we just don't have a coherent system ingrained in us. That's also, I think, why we're so against metrification. Because weights and measures feel hard, because we're basically only semi-literate in our own mother tongue, so a "foreign language" feels like it'd be this huge undertaking.
This really isn't an American thing - it's just human, we can't really visualize dimensions accurately unless we have a good reference. Some may measure the Olympic swimming pool in feet others in meters, but the effect is the same.
lbs = elbows? 2 thousand human elbows?!
Yes. Jesus, why can't Europeans educate themselves on real measurements! We measure in feet and bald eagles for distance. We measure in shotgun shells, elbows and pounds for weight. We measure in ATNT for temperature. That's Ambient Truck Nut Temperature, which is the temperature of a pair of truck nuts after driving for 80 bald eagles at 40 bald eagles per Active Shooter Warning, at sea level on a Wednesday. It's not complicated.
it's from the Latin "libra", for balance, like a set of scales. the £ symbol for pounds as in money is a stylised L for the same reason!
etymology lesson over, imperial/customary gtfo resumes. metric ftw.
Canada does, because we’re mostly metric but still do enough business with the US that we’re sorta half and half
Yeah, but what about the metric shit-ton?
I always forget- is that 100 fuckloads?
I think it's 128 fuckloads.
We call it a metric tonne in Canada.
There's also short ton and long ton which have to be differentiated, but no one ever knows which one they are using.
How to measure like a Canadian
Damn, you guys might be worse than the British.
Something like this? How to measure like a Brit
That’s because you only metricated 40y ago.
I only use that term when I call a lot of items “a metric fuckton of stuff”