3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
Why not just build a Voron? Other than your bed size, nothing else you listed wouldn't work on a Voron build. If you want to make it your own, the design is fully open source so you can modify to your heart's content. There are also a ton of "unofficial" and "official" mods.
It's worth saying that CoreXY != bed slinger, so...
I design my own printers and like the challenge. Vorons are expensive and have a ton of parts. I like unique stuff. Ive made my own delta printer and conveyor belt printer. The limitations of those leave me wanting a more traditional style.
If cost is your design constraint, and you want a CoreXY design, think about what drives the Voron BOM cost and optimize around that. Without thinking about it too much, the thing that jumps to mind are the 4x (2,4) or 3x (trident) z motors. Reducing beyond 3 will not allow you to get the gantry mechanically in plane with the bed, but that didn't stop Bambu labs from using a single motor on the z-axis for the x1 and p1. Ditching the cable chains for a CAN or USB toolhead would also probably save some cost out of the gate (fewer wires + you won't have to buy the cable chains).
Also consider what your design goals are. In the case of single vs 3/4 z motors, you're trading initial fiddling with cost. A single z motor is going to require more fiddling to get right, but it does save on BOM cost.