Technology

209GB? That probably doesn't include all of the RAM: like in the SSD, GPU, NIC, and similar. Ironically, I'd probably approximate it to 200GB if that was the standard, but it isn't. It wouldn't be that much of a downgrade to go to 200GB from 192GiB. Is 192 and 209 that different? It's not much different from remembering the numbers for a 1.44MiB floppy, 1.5436Mbps T1 lines, or ~3.14159 pi approximation. Numbers generally end up getting weird: trying to keep it in binary prefixes doesn't really change that.

The definition of kilo being "1000" was standard before computer science existed. If they used it in a non-standard way: it may have been common or a decent approximation at the time, but not standard. Does that justify the situation today, where many vendors show both definitions on the same page, like buying a computer or a server? Does that justify the development time/confusion from people still not understanding the difference? Was it worth the PR reaction from Samsung, to: yet again, point out the difference?

It'd be one thing if this confusion had stopped years ago, and everyone understood the difference today, but we're not: and we're probably not going to get there. We have binary prefixes, it's long past time to use them when appropriate-- but even appropriate uses are far fewer than they appear: it's not like you have a practical 640KiB/2GiB limit per program anymore. Even in the cases you do: is it worth confusing millions/billions on consumer spec sheets?

abhibeckert in this thread had a good point. Floppies used the power of ten prefixes, so it wasn't particularly consistent.

To me, your attempt at defending it or calling it a retcon is an awkward characterization. Even in your last reply: now you're calling it an approximation. Dividing by 1024 is an approximation? Did computers have trouble dividing by 1000? Did it lead to a benefit of the 640KB/320KB memory split in the conventional memory model? Does it lead to a benefit today?

Somehow, every other computer measurement avoids this binary prefix problem. Some, like you, seem to try to defend it as the more practical choice compared to the "standard" choice every other unit uses (e.g: 1.536 Mbps T1 or "54" Mbps 802.11g).

The confusion this continues to cause does waste quite a bit of time and money today. Vendors continue to show both units on the same specs sheets (open up a page to buy a computer/server). News still reports differences as bloat. Customers still complain to customer support, which goes up to management, and down to project management and development. It'd be one thing if this didn't waste time or cause confusion, but we're still doing it today. It's long past time to move on.

The standard for "kilo" was 1000 centuries before computer science existed. Things that need binary units have an option to use, but its probably not needed: even in computer science. Trying to call kilo/kibi a retcon just seems to be trying to defend the use of the 1024 usage today: despite the fact that nearly nothing else (even in computers) uses the binary prefixes.

Nobody gave a fuck until they bought a 300gb hd with 277gb of free space

The difference was a lot smaller when you were dealing with 700 byte files - it was often a rounding error. Also - you needed two sectors (1024 bytes at the time) two store your 700 byte file, so what did it matter anyway? If you want to get really specific, you actually needed three sectors - because there's metadata on the file... however the metadata will share space with other files so does that count?

Filesystems are incredibly complex and there's no way they can be explained to a lay person. Storage is and always has been an approximation.

It's even worse with RAM these days - my Mac has 298TB of memory address space currently allocated... but only between 6GB and 7GB of "app memory" in use (literally fluctuating between those two from one second to the next when I'm not even doing anything but watching the memory usage).