Linux

48692 readers

758 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
No misinformation
No NSFW content
No hate speech, bigotry, etc

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago

MODERATORS

AgreeableLandscape@lemmy.ml

nooter692@lemmy.ml

MarcellusDrum@lemmy.ml

cypherpunks@lemmy.ml

cyclohexane@lemmy.ml

d3Xt3r@lemmy.nz

Confused about the Write Zeroes command (lemmy.blahaj.zone)

submitted 1 year ago by swizzle9144@lemmy.blahaj.zone to c/linux@lemmy.ml

22 comments fedilink hide all child comments

I'm shopping for a new NVMe SSD drive for my laptop and with the second deciding factor being Linux compatibility, I'd looked up the names of specific drives in the source code of Linux and discovered that their controllers have quirks that have to be worked around.

Now, I figured out more or less how quirks affecting one of the controllers impact its functionality under Linux, but there's another controller that I have a trouble understanding how disabling the aforementioned command limits the functionality of, if at all; therefore I'd like to ask you all, under what circumstances is the command used by a host and can disabling it lower the performance or power efficiency of an impacted controller/drive?

To be clear, the quirk workaround I'm talking a about is NVME_QUIRK_DISABLE_WRITE_ZEROES.

you are viewing a single comment's thread
view the rest of the comments

[–] Bitrot@lemmy.sdf.org 2 points 1 year ago (1 children)

Different feature. NVMe drives include a format command that can zero the drive or do a more in depth erasure, newer drives also have the sanitize option. I think this command just lets the system send a bunch of zeroes instead of having to send each one individually.

[–] forestfuturist@lemmy.world 1 points 1 year ago (1 children)

Thanks for the answer! So do I assume correctly then that things like using the 'overwrite data'-option when running BleachBit, or wiping/erasing partitions or disks with zeroes in GNOME Disks or GParted actually does zero the data like normal, even if the quirk is enabled?

[–] Bitrot@lemmy.sdf.org 1 points 1 year ago

It depends how those tools are working at a lower level. Usually it is better to use a security erase feature in the drive itself, or the NVMe format command. Every drive has some sort of implementation.

SSDs have a lot of tricks to increase performance and longevity, things like wear leveling or not actually writing all those zeroes to the NAND, so writing all zeroes may leave a lot of data untouched on the actual drive while the firmware keeps a tally.