datahoarder

cross-posted from: https://lemmy.world/post/21563379

Hello,

I'm looking for a high resolution image of the PAL cover from the Dreamcast (I believe).

There was this website covergalaxy that used it have in 2382x2382 but all the content seems to be gone. Here's the cache https://ibb.co/nRMhjgw . Internet archive doesn't have it.

Much appreciated!

Just looking at the numbers, it doesn't seem to me like archival will complete before the shutdown date (nov. 11). There are 2million+ elements left, likely 100TB+ of videos.

If you care to help them out, see instructions at the top of the page. Be sure you have a "clean connection", though.

edit: They're saying that the current rate seems to be plenty enough to finish by the deadline. Workers are often left idling at the moment.

The September 17th archive of the oldest public video on ashens' channel is saved with the comments section of a completely different video.

(only loads on desktop for me)

Not sure how this happened, usually it's no comments section at all.

If I were trying to make a point here: an archive doesn't even have to be malicious to contain misleading information presented as fact.

I did try to read the sidebar resources on https://www.reddit.com/r/DataHoarder/. They're pretty overwhelming, and seem aimed at people who come in knowing all the terminology already. Is there somewhere you suggest newbies start to learn all this stuff in the first place other than those sidebar resources, or should I just suck it up and truck through the sidebar?

EDIT: At the very least, my goal is to have a 3-2-1 backup of important family photos/videos and documents, as well as my own personal documents that I deem important. I will be adding files to this system at least every 3 months that I would like incorporated into the backup. I would like to validate that everything copied over and that the files are the same when I do that, and that nothing has gotten corrupted. I want to back things up from both a Mac and a Windows (which will become a Linux soon, but I want to back up my files on the Windows machine before I try to switch to Linux in case I bungle it), if that has any impact. I do have a plan for this already, so I suppose what I really want is learning resources that don't expect me to be a computer expert with 100TB of stuff already hoarded.

I download lots of media files. So far I have been storing these files after I am done with them on a 2TB hard disk. I have been copying over the files with rsync. This has so far worked fairly well. However the hard disk I am using is starting to get close to full. Now I am needing to find a solution so I can span my files over multiple disks. If I were to continue to do it as I do now, I would end up copying over files that would already be on the other disk. Does the datahoading community have any solutions to this?

For more information, my system is using Linux. The 2TB drive is formatted with ext4. When I make the backup to the drive I use ’rsync -rutp’. I don’t use multiple disks at the same time due to having only one usb sata enclosure for 3 1/2 inch disks. I don’t keep the drive connected all the time due to not needing it all the time. I keep local copies until I am done with the files (and they are backed up).

Hey everyone,

it’s me again, one of the two developers behind GameVault, a self-hosted gaming platform similar to how Plex/Jellyfin is for your movies and series, but for your game collection. If you've hoarded a bunch of games over the years, this app is going to be your best friend. Think of it as your own personal Steam, hosted on your own server.

If you haven’t heard of GameVault yet, you can check it out here and get started within 5 minutes—seriously, it’s a game changer.

For those who already know GameVault, or its old name He-Who-Must-Not-Be-Named, we are excited to tell you we just launched a major update. I’m talking a massive overhaul—so much so, that we could’ve rebuilt the whole thing from scratch. Here’s the big news: We’re no longer relying on RAWG or Google Images for game metadata. Instead, we’ve officially partnered with IGDB/Twitch for a more reliable and extended metadata experience!

But it doesn’t stop there. We’ve also rolled out a new plugin system and a metadata framework that allows you to connect to multiple metadata providers at once. It’s never been this cool to run your own Steam-like platform right from your good ol' 19" incher below your desk!

What’s new in this update?

• IGDB/Twitch Integration: Say goodbye to unreliable metadata scrapers. Now you can enjoy game info sourced directly from IGDB.
• Customizable Metadata: Edit and fine-tune game metadata with ease. Your changes are saved separately, so the original data stays intact.
• Plugin System: Build your own plugins for metadata or connect to as many sources as you want—unlimited flexibility!
• Parental Controls: Manage age-appropriate access for the family and children.
• Built-in Media Player: Watch game trailers and gameplay videos directly in GameVault.
• UI Overhaul: A fresh, streamlined look for the app, community, game and admin interface.
• Halloween Theme: For GameVault+ users, we’ve added a spooky Halloween skin just in time for the season!

Things to keep in mind when updating:

• GameVault Client v1.12 is now required for servers running v13 or above.
• Older clients won’t work on servers that have been updated to v13.

For a smooth update and a guide on how to use all these new features, check out the detailed migration instructions in the server changelogs. As always, if you hit any snags, feel free to reach out to us on Discord.

If you run into any issues or need help with the migration, feel free to join and open a ticket in our Discord community—we’re always happy to help!

If you want to support our pet-project and keep most upcoming features of GameVault free for everyone, consider subscribing to GameVault+ or making a one-time donation. Every little bit fuels our passion to keep building and improving!

Thanks for everything! We're more than 800 Members on our discord now and I can’t wait to hear what you think of the latest version.

I know for photos i could throw them through something like Converseen to take them from .jpg to .jxl, preserving the quality (identical visially, even when pixel peeping), but reducing file size by around 30%. What about video? My videos are in .h265, but can i reencode them more efficiently? im assuming that if my phone has to do live encoding, its not really making it as efficient as it could. could file sizes be reduced without losing quality by throwing some processing time at it? thank you all

Yoko Taro is the creative director behind the Nier and Drakengard series, and he has released a lot of supplemental material across a variety of mediums over the years in Japan. Accord's Library is a site that is dedicated to finding this material, archiving it, and translating it.

Today, in Accord's Library Discord, they announced that they received a Cease and Desist from Square-Enix, and on Oct 31, the Library and Gallery sections of the site will be closed and taken offline.

Announcement Screenshot

If anyone is skilled with backing up sites, any assistance would be appreciated. Even if it's just to point at the right tool for the job (been almost a decade since I've backed up part of a site).

Shoutout to !helloharu@lemmy.world making the original post.

Good data to archive.

Hi everyone!

I've been using Create-Synchronicity for a few years, and it's been great for my needs. However, it hasn't been updated in a while, and I'm curious if there might be a more current alternative out there.

I'm looking for features like mirror, incremental, and two-way incremental backups, as well as the ability to schedule my backups. Opensource is a great plus.

There are plenty of options available, so I thought it would be a good idea to ask you all what you're using and what you would recommend.

Thanks a bunch for your help!

It's mostly old computer and gaming magazines at this time.

I tried to put emphasis on the personal nature of the question in the title. I'm not asking for myself or the average individual. I also mean ideal in the way where cost is still a factor. The iPhone 16 Pro has a 1TB model but it's around $500 more expensive than the 128GB version.

I imagine answers are going to vary significantly depending on an individuals approach like relying on cloud storage, SD cards, or a Magsafe NVMe drive for example.

I found 1TB (512GB on the phone and on the SD card) was ideal for me. I could keep the things I wanted for "just in case scenarios" like the files needed for the source ports of Diablo, Half Life, and Morrowind in case I want to play a game or some ebooks if I have time to read. I never needed to uninstall applications and shuffle things. I even had plenty of breathing room.

Another question I'd be interested in hearing people's answers to is what is the minimum storage capacity you would consider for a phone. I don't think I would buy a device with less than 256GB of potential storage. If it has an SD card slot that opens up the potential a significantly.

I have a bunch of old VHS tapes that I want to digitize. I have never digitized VHS tapes before. I picked up a generic HDMI capture card, and a generic composite to HDMI converter. Using both of those, I was planning on hooking a VCR up to a computer running OBS. Overall, I'm rather ignorant of the process. The main questions that I currently have are as follows:

• What are the best practices for reducing the risk of damaging the tapes?
• Are there any good steps to take to maximize video quality?
• Is a TBC required (can it be done in software after digitization)?
• Should I clean the VCR after every tape?
• Should I clean every tape before digitization?
• Should I have a separate VCR for the specific purpose of cleaning tapes?

Please let me know if you have any extra advice or recommendations at all beyond what I have mentioned. Any information at all is a big help.

Hey folks, I'm lucky enough to be in one of the few places on the internet that uses LTO.

I'm running LTO-8 tape. My current drive is kind of a dud, I'm interested in a new (to me) drive. Either internal in just an old desktop, or an external drive. I'm not afraid to shell out for it, but if I am I'm nervous to drop 2000 on just a random ebay seller. Anyone have any reputable sources? In the Seattle area if anyone knows a local one too.

Years ago I came across filecoin/sia decentralized data storage and I started trying them but then I stopped due to lack of time. Some days ago I've heard in a podcast about a kind of NAS that does kinda the same thing: it spreads chunks of data across other devices owned by other users.

Is there a service that does this but with your own hardware or, even better, something open source where you can have X GB as far as you share the same amount of space plus something extra?

It would be great for backup.

I'm entertaining the thought to write my backups onto tape storage. So my questiont to this community is: does someone know where (if any) to get cheap and simple (my requirements are "just writes & reads the data and is usable with a Linux machine") used tape drives?

Thanks for any hints.

[The guide isn't mine and I'm not affiliated with it, I'm just sharing a mind-blown moment for me.]

Over the years, I have gathered many notebooks that admittedly not all contain very important information and take up a lot of space (possibly a cubic meter or more). But being kind of a (data)hoarder, I dont want to just throw them away. It's work that took years.

My solution: scanning them. My phone has a built-in camera scanner that does a suprisingly good job (it helps that the camera is kinda good too), so I have scanned thousands of pages so far. But the process is slow and takes a lot of manual labor (flipping pages, aligning pages, retaking bad photos, creating pds etc.). A typical notebook (~120pages) may take me 15minutes or more.

So I thought that maybe I could speed up the process (partially at least) by either buying a scanner or paying someone to scan them (I don't have a proper scanner, yet). Removing the pages without damaging them is a challenge though. That's where the guide in the link comes in: it turns out it's very easy to remove the spiral spring from the notebooks! I was gonna pull the pages until I found that guide. I suppose it's also very easy to remove the staples from staple-bound notebooks too. I might just have "won" many hours of my life with this idea.

The video in the guide that helped me:

https://www.youtube.com/watch?v=lfMUVpwLZGM

(For the record, my xiaomi 10 phone can scan items by creating ~20MP images which translates to typical-to-high resolutions if I scan A4 or A5 pages. Fortunately, many scanners can reach that quality. I just need them not to apply any weird effects or compression to the scanned document.)

Hi everyone,

I'm looking for a more efficient way to save and archive Lemmy comments and posts on my Android phone.
Currently, when I come across a comment I want to keep for future reference, I manually copy the text and link, then paste it into a note in my Obsidian vault. If there's an image or other media in the original post, I save and include that as well.

However, this process feels a bit cumbersome. Ideally, I’d like a way to quickly save or share a comment or post URL and automatically archive the top 20 or so comment chains, along with the original post, including any images, videos, or articles.

Has anyone found a streamlined method for doing this? I often find that by the time I return to check the responses or review the content, the post or article has disappeared. Any tips or tools that could help simplify this process would be greatly appreciated!

Thanks in advance for your suggestions!

cross-posted from: https://lemmy.dbzer0.com/post/26278528

I'm running my media server with a 36tb raid5 array with 3 disks, so I do have some resilience to drives failing. But currently can only afford to loose a single drive at a time, which got me thinking about backups. Normally I'd just do a backup to my NAS, but that quickly gets ridiculous for me with the size of my library, which is significantly larger than my NAS storage of only a few tb. And buying cloud storage is much too expensive for my liking with these amounts of storage.

Do you backup only the most valuable parts of your library?

I'm celebrating my datahoarding problem.

cross-posted from: https://sh.itjust.works/post/23677247

Ensh*ttification

https://m.ai6yr.org/@ai6yr/112956803111115013

cross-posted from: https://beehaw.org/post/15404535

Data: https://archive.org/details/gamefaqs_txt

Mirror upload for faster download, 1 Mbit (expires in 30 days): https://ufile.io/f/r0tmt

GameFAQs at https://gamefaqs.gamespot.com hosts user created faqs and documents. Unfortunately they are baked into the HTML webpage and cannot be downloaded on their own. I have scraped lot of pages and extracted those documents as regular TXT files. Because of the sheer amount of data, I only focused on a few systems.

In 2020, a Reddit user named "prograc" archived faqs for all systems at https://archive.org/details/Gamespot_Gamefaqs_TXTs . So most of it is already preserved. I have a different approach of organizing the files and folders. Here a few notes about my attempt:

• only 17 selected systems are included, so it's incomplete
• folder names of systems have their long name instead short, i.e. Playstation instead ps
• similarly game titles have their full name with spaces, plus a starting "The" is moved to the end of the name for sorting reasons, such as "King of Fighters 98, The"
• in addition to the document id, the filename also contain category (such as "Guide and Walkthrough"), the system name in short "(GB)" and the authors name, such as "Guide and Walkthrough (SNES) by BSebby_6792.txt"
• the faq documents contain an additional header taken from the HTML website, including a version number, the last update and the previously explained filename, plus a webadress to the original publication
• HTML documents are also included here with a very poor and simple conversion, but only the first page, so multi page HTML faqs are still incomplete
• no zip archives or images included, note: the 2020 archive from "prograc" contains false renamed .txt files, which are in reality .zip and other files mistakenly included, in my archive those files are correctly excluded, such as nes/519689-metroid/faqs/519689-metroid-faqs-3058.txt
• I included the same collection in an alternative arrangement, where games are listed without folder names for the system, this has the side effect of removing any duplicates (by system: 67.277 files vs by title: 55.694 files), because the same document is linked on many systems and therefore downloaded multiple times