Cooljimy84

Unmounting CIFS , 1:30 timeout ! I just wannatgo to bed....

But beanz meanz Heinz.....

I run snapraid and mergerfs, as the nas storage. Not much changes on my NAS and the stuff I really care about like my pictures and videos are on a small ZFS pool. Both are directly on proxmox, meaning I can just plug them in to another Linux machine and research if it all goes sideways. Its all shared from the host via SMB NFS or for jellyfin and immicher its a moint point for the container

You could also padding out the screwdriver tip or the screw hole. I've used sticky tape before, but again if its tight your pretty much out of luck...

Depending how tight it is you could superglue something to it to turn it ?

Looks like a cpu/gpu type power connector. Even if its a standard plug does not mean its a standard pin out ! Craft computing on YouTube had what looked like a standard plug in his server but it had a 12volt and ground switched, so would have caused some real damage

I second this, when a drive shits the bed a sata controller handles it better, some times with a USB adapter you mess the whole bus up and need a reboot of the machine (from using them on windows experience)

Can't remember how long ago I bought it, but it was either beta or pretty alpha at the time

"It builds character"

They also put out a huge amount of heat ! Quite useful in old high rise flats !

I suspect it completes almost instantly if you agree to it tho ?

Does it make the bleeps when you press buttons and move sliders ?