leathercraft

503 readers

6 users here now

a place for makers and creators - whether business or side hustle or hobby.

founded 2 years ago

MODERATORS

bowreality@lemmy.ca

How often do you replace your blades? (lemmy.blahaj.zone)

submitted 1 day ago* (last edited 1 day ago) by Pipster@lemmy.blahaj.zone to c/leathercraft@lemmy.ca

7 comments fedilink hide all child comments

For most of my detailed cutting I've been using generic #11 craft knife blades and it seems the "wear curve" on them is rather aggressive to start with then kind of goes flat.

Like, a new blade goes through leather like butter but that lasts for maybe 4-5 decently sized cuts before it starts needing multiple swipes and then at some point it almost feels like the leather is bumpy or grainy where the blade isn't cutting through denser sections.

I don't want to be too wasteful nor do I want to be forever changing blades - how long do you tend to go between changes?

top 7 comments

sorted by: hot top controversial new old

[–] YesButActuallyMaybe@lemmy.ca 4 points 1 day ago (1 children)

There's not much you can do except to stock up on blades and strapping them before every use.. Skiving razor blades are the worst imho.. as you said you get 4-5 good cuts before they become too dull

you dont do yourself any favors by saving blades for longer than they should be kept

[–] Pipster@lemmy.blahaj.zone 1 points 6 hours ago (1 children)

How are you stropping those blades out of interest? I never even thought of doing that for a disposable blade.

[–] YesButActuallyMaybe@lemmy.ca 1 points 5 hours ago

There’s two compounds that i use. Green first and then white.. basically for everything that cuts

[–] danieljoeblack@lemm.ee 3 points 1 day ago (1 children)

I used to wait waaay to long between changing my blades. That stopped when I ended up stabbing myself in the finger because I was pressing so hard because of the dull blade and the knife slipped.

Now I change my blade anytime I find myself pressing harder, or need to make more than two passes. Sometimes I just throw in a new one when I'm starting a project for someone else as stuff tends to come out nicer with a sharp blade.

+1 to the other user that mention stroping as that can help extend the usable lifetime (by a little).

But yeah, if you can get a big pack of them cheap online and just change them as you feel you need to.

[–] Pipster@lemmy.blahaj.zone 1 points 6 hours ago

I think that, having never really used craft knives much, I never thought about the costs or longevity. I've had a few of those little sets that come with one blade each of a load of shapes but not really any that came with a pack of replaceable ones. The knife I've got came with 5 blades, I never even realised how cheap 100 extra blades even was...

[–] bishbosh@lemm.ee 2 points 1 day ago

Just long enough that I start pushing really hard, or needing multiple passes to fully get through a cut, then when I do I kick myself for not doing it sooner.

[–] HappySkullsplitter@lemmy.world 2 points 1 day ago

Usually after I snap one from maximum effort